tekmarNet®2 Thermostat 529Installation & Operation ManualD52912/11ZoningReplaces: 12/101 of 28 © 2011 D 529 - 12/11The tekmarNet®2 Thermostat 52
10 of 28© 2011 D 529 - 12/11Settings (2 of 8)Display Range Access Description Set to40 to 122°F(4.5 to 50.0°C)Default = 72°F (22.0°C)InstallerUserS
11 of 28 © 2011 D 529 - 12/11Display Range Access Description Set to°F or °CDefault = °FInstallerUserTEMPERATURE UNITSPress the or the button t
12 of 28© 2011 D 529 - 12/11Display Range Access Description Set toOff, 40 to 122°F(Off, 4.5 to 50.0°C)Default = 72°F (22.0°C)InstallerUserSET FLOO
13 of 28 © 2011 D 529 - 12/11Display Range Access Description Set to40 to 122°F, Off(4.5 to 50.0°C, Off)Default = 85°F(29.5°C)InstallerFLOOR MAXIMU
14 of 28© 2011 D 529 - 12/11Display Range Access Description Set toOff, Room, Outdoor, Floor, Floor dSPInstallerAUXILIARY SENSORSelect the type of
15 of 28 © 2011 D 529 - 12/11Display Range Access Description Set toOFF, OnDefault = OffInstallerHEAT 1 SUPPLY PUMP DELAYSelect whether or not the
16 of 28© 2011 D 529 - 12/11Display Range Access Description Set toADJUSTADJUSTOFF, 1 to 16 InstallerAIR GROUPSelect if this thermostat should be a
17 of 28 © 2011 D 529 - 12/11Heating OperationSection ASequence of OperationWhen using only a room temperature sensor, the thermostat operates the
18 of 28© 2011 D 529 - 12/11Exercising ---------------------------------------------------------- -------------------------------------------------
19 of 28 © 2011 D 529 - 12/11Air Group OperationSection BIn order to prevent heating and cooling at the same time, this thermostat can operate toge
2 of 28© 2011 D 529 - 12/11Congratulations on the purchase of your new tekmar thermostat.This manual will step through the complete installation, p
20 of 28© 2011 D 529 - 12/11SchedulesSection DLowering the room temperature setting reduces the amount of fuel required to heat the building result
21 of 28 © 2011 D 529 - 12/11TroubleshootingError Messages (1 of 4) Error Message DescriptionCONTROL ERRORThe thermostat was unable to correctly re
22 of 28© 2011 D 529 - 12/11Error Messages (2 of 4)Error Message DescriptionDEVICE LIMITThe number of devices on the tekmarNet® bus has exceeded 24
23 of 28 © 2011 D 529 - 12/11Error Message DescriptionAUXILIARY ROOM SENSOR OPEN CIRCUITThe auxiliary room sensor has an open circuit. Check for lo
24 of 28© 2011 D 529 - 12/11Error Message DescriptionOUTDOOR SENSOR OPEN CIRCUITThe auxiliary outdoor sensor has an open circuit. Check for loose o
25 of 28 © 2011 D 529 - 12/11Symptom Look for... Corrective ActionNo HeatH1 SymbolH1 symbol indicates heat is on. Check if zone valve or zone pump
26 of 28© 2011 D 529 - 12/11Item Setting Item SettingSet Room Heat Schedule MemberSet Room Heat Room SensorSet Room Heat Away SensorSet Floor Heat
27 of 28 © 2011 D 529 - 12/11Technical DatatekmarNet®2 Thermostat 529; Two Stage HeatPackaged weight 0.8 lb. (380 g)Enclosure White PVC plastic, NE
tekmar Control Systems Ltd., Canadatekmar Control Systems, Inc., U.S.A.Head Office: 5100 Silver Star RoadVernon, B.C. Canada V1B 3K4(250) 545-7749 Fa
3 of 28 © 2011 D 529 - 12/11Choose the placement of the thermostats early in the construction process to enable proper wiring during rough-in.Consi
4 of 28© 2011 D 529 - 12/11If a switch box was not used, mount the thermostat directly to the wall.Feed the wiring through the openings in the back
5 of 28 © 2011 D 529 - 12/11Wiring 2nd Stage Heat ----------------------------------------------- -----------------------------------------------Th
6 of 28© 2011 D 529 - 12/11Testing the Thermostat WiringTesting the Power --------------------------------------------------- ---------------------
7 of 28 © 2011 D 529 - 12/11Switch SettingsSwitches are set to “On” position from the factory, and do not require changing for most applications.12
8 of 28© 2011 D 529 - 12/11SECONDARY DISPLAYMAIN DISPLAYHEAT 1Stage 1 is turned on.HEAT 2Stage 2 is turned on.SUNOperating at the occupied (day) te
9 of 28 © 2011 D 529 - 12/11Settings (1 of 8)Display Range Access Description Set to40 to 95°F(4.5 to 35.0°C)Default = 70°F (21.0°C)InstallerUserSE
Commentaires sur ces manuels